Generated using HueForge software!
You can play around with different colors and swap heights to customize the look, but I went with the following:
Layers 1-6 = Black (Bambu Labs PLA)
Layers 7-12 = Gray/Silver (eSUN PLA+ Silver)
Layers 13-14 = Gray/Silver (eSUN Silk PLA Silver)
Layers 14+ = White (eSUN PLA+ Cool White)
Instructions for Bambu Studio and PrusaSlicer layer swaps.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm