Project: gorillaz final.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 188.24x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Yellow Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Matte Charcoal Transmission Distance: 0.3
This print uses 3 unique filaments

Swap Instructions:
    Start with Yellow
    At layer #7 (0.72mm) swap to Red
    At layer #20 (1.76mm) swap to Charcoal for the rest.

You can easily switch the first color to white if you prefer the original look from the image. Be aware though, the red shadows will still be there.