This adapter can be used to mount bigger swivel wheels with a mounting hole pattern of 44x58 onderneath your Whirlpool air conditioner/heater like the PACW212HP (and maybe the PACB212HP, but not confirmed).

The increased height is needed for the water outlet (the lower one), so you can put a small container under it to capture the condensated water.

• Print the Airco adapter STL 4 times
• Optionally print the Airco adapter riser STL 4 times (to add extra height)
• Remove the old swivel wheels
• Place the first part of the adapter on the airconditioner with the original screws
• Optionally place the riser next
• Now place the swivel wheel and secure everything together using 4x M8 nut + M8 bolts per adapter.
  (use M8x15 bolts without the riser, M8x20 bolts with the riser)

Features & printing tips:

• Tested with eSun PLA+ and Bambu Lab P1P
• Supports are optional when the parts are printed in the right orientation