Car Phone Holder v3 by Duane777

Duane777

Tools>Gadgets

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

3.8 h

4 plates

4.8(43)

Single color, one plate, stronger - 0.2mm layer, 3 walls, 15% gyroid infill

3 h

1 plate

4.7(23)

A1 mini, 0.2mm layer, 2 walls, 15% infill

4.3 h

4 plates

5.0(4)

Boost

122

199

109

700

733

Released

Description

This a redesign of a popular model I made a few years ago, most phones have increased in size. Also the tolerances afforded by Bambu Lab machines make it much easier to print and assemble. It suits phones up to 12mm thick.

4 screws M3 x 8 or 10mm long will do.

The back cover has 3 indents to lock the vent clips, you can use 2 on the sides or one in the centre, there's also a longer reach vent clip.

UPDATE: Added the vertical gripper which I seemed have forgotten. Thank you user_335578002

phone holder

phone

car

Comment & Rating (109)

@BARCAFAN22

failed.

The designer has replied

@Duane777

How is that my problem? if you used PLA then that is normal, I can never get PLA to stick to any biuld plate🤣

@W3DTEC

Boosted

get yourself some 3DLAC and you will never have those problems again

@iangeitner11

Replying to @Duane777 :

unreal

@user_3810470384

Absolut perfekt. my phone fits. but how can i take the holder off?

The designer has replied

@Duane777

Off the vents? There's a strip with a slant cut on one end, push that in between the vent and the top clip grip.

@user_3810470384

Replying to @Duane777 :

Oh thank you, i will try it. 😊

@JameJame

Works great! printed easily, except for Elegoos tangle rolls, lol. Very useful, and this solves the car mount problem once and for all. It easily fits my s23 ultra in its (fairly slim) case.

(Edited)

@bardificer

@JameJame Holy shit. Thank you for answering both of my big questions at once without even knowing it. Sincerely, An Elegoo printing S23 Ultra phablet user

@TheCoffeeGuy

Boosted

what is this piece for?

The designer has replied

@Duane777

its a spacer to make it work smoothly.

@TheCoffeeGuy

Boosted

can you make a clip for vertical vents please? this came out absolutely gorgeous and I can't believe how perfectly it works. although I can't use it in my van, I have a second one printed for my car with horizontal vents. is there anything you can do about the vertical please? and what is this piece for?

(Edited)

@user_3305522199

Nice model! It fits my good ol' Matrix. I made mine with Polymaker's PETG. Just one thing: if you print this, make sure your printer and filament profile are well-calibrated. It has very little clearance. I'll have to check my own settings because I had to do a considerable amount of sanding and add some lubricant to be able to move the parts. But in the end, it looks great!

The designer has replied

@Duane777

Maybe dial back the flow a bit, I use stock bambu profiles and they appear to be a bit on the conservative side. Printed in ABS mine almost drops under it's own weight.