Raspberry PI Multi Rack - Free 3D Print Model

Search models, users, collections, and posts

swboos21

Hobby & DIY>Electronics

IP Report

Print Profile(3)

All

P1S

X1 Carbon

P2S

H2C

X2D

H2S

P1P

H2D Pro

A2L

X1E

H2D

All Parts Single Plate -Raspberry Pi 4B tested-

5.2 h

1 plate

4.6(7)

4 set of sleds for 4 raspberry pi's

3.7 h

1 plate

5.0(2)

1 set of sleds for 1 raspberry pi

1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

125

345

359

113

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2 Socket Head Cap Machine Screws (SHCS)

List other parts

threaded brass heat insert - m2x2x3.2 x 3: set of brass inserts bought here - https://a.co/d/6fekP9h

Description

This is 4x Raspberry Pi Holder with the ability to swap and power from within the case. I have looked and tested around and the model works with all standard raspberry pi's. YAY. I have been successful in mounting a raspberry pi 3b, and a libre compute board (le potato), as they all use the same mounting and size dimensions. NOW UPDATED FOR RASPBERRY PI 4 AND 5! I have also included links for used hardware at the end of the description. I have made mounts and parts to hold the USB power supply and network switch via a friction fit. The addons for the power supply and switch are their own stand alone parts so they can be added independently. To add them on I just welded them together with a soldering iron but glue would work just fine. I plan on adding active cooling with 60mm Fans via usb power in the future.

For the inserts I used the m2*2*3.2 sunk in with a soldering iron and m2x4 or m2x8 screws. You need 3 brass inserts and 3 screws per pi.

If you like the model please support, it took far too much filament to prototype this.

Boost Me (for free)

Also, here is a vid showing how to assemble.