Everyone is familiar with the various types of cable grommets for furniture panels. With Conduito, you now have the option to use a version specially optimized for 3D printing. By carefully studying existing models, I developed a variant tailored for 3D printing. This design allows you to produce a cable grommet directly with your own 3D printer.

Conduito is available for a variety of hole diameters, from 35 mm to 125 mm, including common sizes like 40 mm, 60 mm, 80 mm, and 100 mm, as used by Forstner drills, for example. Calculating the diameter of the cable grommet is straightforward: hole diameter minus 10 mm. The panel thickness should be at least 15 mm.

Complete information about this project, including links to both free and licensed versions, is available on its dedicated page in my Wiki. If you like my work, please hit "Like" and don't forget to follow my profile.

Wiki (English):
https://wiki.creolet.com/en/projects/conduito-cable-grommet

Wiki (German):
https://wiki.creolet.com/projects/conduito-cable-grommet

Collection of all metric (mm) sizes:
https://makerworld.com/en/u/1762145450/collections/67250

Collection of all imperial (inch) sizes:
https://makerworld.com/en/u/1762145450/collections/67249

---
Drill hole diameter: 68 mm

---
The print settings provided here are designed for a 0.4 mm nozzle and a layer height of 0.2 mm. The settings can be easily found in most common slicing programs like Cura, PrusaSlicer, or BambuStudio/OrcaSlicer.

• Wall generator: preferably Arachne
• Walls: 3
• Top layers: 5
• Bottom layers: 5
• Infill density: from 20%
• Infill pattern: Any