Bruzl

cover

PXL_20240714_101002159~2.jpg

PXL_20240714_101118410~2.jpg

PXL_20240714_100100926~2.jpg

PXL_20240714_095918051~2.jpg

plate_1.png

2024-07-14_331b58b40fa33.jpg

<ul><li>0.2mm layer</li><li>infill 15% gyroid</li><li>print with support </li><li>print with PET-G and PLA Supportmaterial</li><li>print with AMS-System&nbsp;&nbsp;</li></ul>

0.2mm layer, 2 walls, 15% infill, AMS

Dose_M50x2_nicht_Stapelbar.jpg

Einfache Dose ohne die Nut im Deckel und dem Gegenstück am Boden der Dose.<ul><li>2 Wände</li><li>0,2mm Schicht</li><li>Beim Gewinde wird die Schichthöhe auf 0,08mm reduziert (variable Schichthöhe)</li><li>Füllung 10% Gyroid</li><li>Archimedische Oberfläche und untere Flächen</li></ul>

Simple can without the groove in the lid and its counterpart on the bottom of the can.<ul><li>2 Walls</li><li>0.2mm Layer Height</li><li>Layer height reduced to 0.08mm for the thread (variable layer height)</li><li>10% Gyroid Infill</li><li>Archimedean top and bottom surfaces</li></ul>

Simple Can

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Runde stapelbare Dose / Box mit Deckel. Gewinde M50x2.</h3>&nbsp;Außendurchmesser = 53,5mmInnendurchmesser = 44,7mmHöhe = 69mm&nbsp;Ich benutzte PET-G, als Supportmaterial PLA.Wie auf den Fotos zu sehen ließ sich das Stützmaterial dadurch einfach entfernen.Dazu wird das AMS-System benötigt und ein Supportmaterial.&nbsp;Die Dose lässt sich auch ohne AMS drucken, hier muss aber dementsprechend auch mehr aufwand beim Stützmaterial entfernen aufgebracht werden.&nbsp;------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;<h3>Round stackable tin / box with lid. Thread M50x2.</h3>&nbsp;Outer diameter = 53,5mmInner diameter = 44,7mmHeight = 69mm&nbsp;I used PET-G and PLA as the support material.As you can see in the photos, the support material was easy to remove.This requires the AMS-System and a support material.&nbsp;The box can also be print without AMS-System, but this requires more effort to remove the support material.&nbsp;----------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>thank you :)</boostcontent></boostme>

<h3>Round stackable tin / box with lid. Thread M50x2.</h3>&nbsp;Outer diameter = 53.5mmInner diameter = 44.7mmHeight = 69mm&nbsp;I used PET-G with PLA as the support material.As you can see in the photos, the support material was easy to remove.This requires the Bambu Lab AMS-System and a support material.&nbsp;The box can also be printed without the AMS-System, but this requires more effort to remove the support material.&nbsp;----------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>thank you :)</boostcontent></boostme>

Print Profile(2)

Description

Round stackable tin / box with lid. Thread M50x2.

Comment & Rating (12)

License