I wanted additional light in my P1S, but I didn't want to add LEDs inside the print area in case something went wrong and an LED strip or wire accidentally fell onto the print surface. So, I designed this box to hold a 30cm LED closet light on top of the glass cover at a good angle to shine into the print area. The box has a cutout to reach the on/off switch and the charging port.
The print consists of 1 plate, with the box printed in PLA Silk, along with an optional TPU gasket that will press fit.
I used the following light from Amazon, which is mounted to the inside of the box using the supplied brackets:
https://www.amazon.com.au/dp/B09SM2F2NN?ref=ppx_yo2ov_dt_b_product_details&th=1