Magnet Placing tool | Easy Magnet Setter

This is my tool for making magnet placing easy and hasslefree.

I made a total of 3 different Sliders, one with a + (for the positive pole) one with a - (for the negative pole) and one without any markings for all of you that do not have access to an AMS or similar. Just print it in different colours to distinguish them.

For the assembly You will need 2 times an M4 threaded rod with approx. 100mm in length. If you want Your Setter for a specific polarity just add one or more round magnets with a 3mm diameter on the tip.

As shown in the picture the rod + the magnet should stick 75mm out of the slider, the adjustment is very simple, just screw it in / out as you need it. Make sure that the magnet / the tip is in contact with the inner side of the body tip for maximum stability.

Enjoy the model!

If You have any feedback or suggestions for improvement please let me know.

I create all my models by myself, its a hobby but it consumes a lot of time. If you like it or want to support it consider one of the following:

• Like if you think it's good
• Follow if you want to get an update on significant changes of the models and my future creations
• Click here if you want to check out my other designs
• Boost if you want to support the model
• Buy parts and filament with the BOM feature of the model

• Become a member if you want to sell my models

Thank You for Your Support!