Came across this image while browsing for Independence Day Hueforge ideas. Looked like a fun one!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x117.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Elegoo Black Transmission Distance: 0.2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 0.4
PLA BambuLab Basic Jade White Transmission Distance: 3.2
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Blue Gray
At layer #12 (1.12mm) swap to Red
At layer #14 (1.28mm) swap to Dark Blue
At layer #17 (1.52mm) swap to Ash Gray
At layer #19 (1.68mm) swap to Jade White for the rest.