Project: Elbe bridge Dömitz Germany
You can change the size, but only on Y and X, never change the size of Z.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Bambulab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 3
PLA Silvergrey Transmission Distance: 1
PLA Bambulab Basic White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #11 (0.88mm) swap to Blue Gray
At layer #16 (1.28mm) swap to Grey
At layer #22 (1.76mm) swap to White for the rest.