mini airplane 4.0
Copyright Claim
mini airplane 4.0
Boost
199
345
60
In Contest
Beach & Pool EssentialsPrint Profile(5)
0.08mm layer, 2 walls, 80% infill
Designer
22 min
1 plate
A1 Mini Version // Nice & Smooth // 0.08mm layer //
17 min
1 plate
![[X&Y 94% scaled] 0.08mm layer, 2 walls, 80% infill, A1 mini](https://makerworld.bblmw.com/makerworld/model/US6400b011883e4/91430283/instance/2024-06-24_64cf2d08db642.jpeg?x-oss-process=image/resize,w_100/format,webp)
[X&Y 94% scaled] 0.08mm layer, 2 walls, 80% infill, A1 mini
21 min
1 plate
0.08mm layer, 2 walls, 80% infill
22 min
1 plate
Click to see more
Open in Bambu Studio
Boost
199
345
60
14
877
851
Released
Description
another version of the mini plane. the first layer must have a height of 0.119, for greater strength. other layers are set to 0.08mm. Bend the rear wings under approx. 45°. The large wings can also be bent. Throw the glider up, then it flies far, suitable for years of use even into the wind.
The wings must be printed on 3 layers, otherwise the plane does not fly well.
The Airplane is printed upside down, after printing the model must be turned and the wings bent in the right direction
Comment & Rating (60)
All
Print Profile
0.08mm layer, 2 walls, 80% infill
thank you for sharing this great design
The designer has replied
1
Reply
thank you ☺️
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
Dead easy print and fly is pretty well too thank you very much for making and sharing.
The designer has replied
1
Reply
thank you, the wings are on the opposite side, the print is upside down, try to bend it the other way around. there are also grooves at the bend for better bending. It should then fly even better ☺️
(Edited)1
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
parfait merci 👍
The designer has replied
1
Reply
thank you ☺️
0
Reply
flies well and a good fast print
The designer has replied
1
Reply
thank you ☺️
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
It printed flawlessly
The designer has replied
1
Reply
Nice ☺️
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
Absolut genial!
The designer has replied
1
Reply
Nice ☺️
the wings should be correctly bent to the other side, the print is upside down. But if you fly, leave the wings as they are ☺️
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
very cool little toy
The designer has replied
1
Reply
thank you ☺️
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
Perfect and simple print.
1
Reply
it flew from my balcony once but after that it just flops when I try to fly it
The designer has replied
0
Reply
it is necessary to bend the front and rear wings. in your photo you can see that your wings are deformed, try to straighten them and then bend them in the place where the grooves are
0
Reply
Print Profile
0.08mm layer, 2 walls, 80% infill
super
1
Reply
© 2024 MakerWorld