A.I Generated picture from designer dot microsoft dot com
“a macro detailed image of beetlejuice with a plain white background. Base this off the movie Beetlejuice. Only use Black, Green, Purple and White”
NOTE: You can scale this but don't adjust the Z hight.
Beetlejuice Hueforge 150x150
Project: Beetlejuice.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Lavender Purple
At layer #16 (1.36mm) swap to BambuLab Green
At layer #19 (1.6mm) swap to Jade White for the rest.