All these images were Generated Using Microsoft Design Studio.

These are all 150x150 but can be scaled up (DON'T ADJUST THE Z HEIGHT)

These are all Macro Detailed Images Generated from A.I that I took into Hueforge and painted filament using Black, Dark Gray, Light Gray and White.

Hope you Enjoy!

Here are the Slicer settings for filament changes.

Project: Dumbledore.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (1.28mm) swap to Space Gray
At layer #15 (1.88mm) swap to Gray
At layer #20 (2.48mm) swap to Jade White for the rest.

Project: Harry.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (1.28mm) swap to Space Gray
At layer #13 (1.64mm) swap to Gray
At layer #18 (2.24mm) swap to Jade White for the rest.

Project: Voldemort.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3.3mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (1.28mm) swap to Space Gray
At layer #14 (1.76mm) swap to Gray
At layer #18 (2.24mm) swap to Jade White for the rest.

Project: Dobby.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 1.5mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #14 (1.76mm) swap to Space Gray
At layer #18 (2.24mm) swap to Gray
At layer #22 (2.72mm) swap to Jade White for the rest.