This was an AI Generated picture of the joker made from designer dot microsoft dot com
The prompts I used were
“a macro detailed image of the joker with a paint splatter background. Do in the style of the dark knight joker. Only use Black, Green, Purple and White and make the background in all white with a few paint splatters.”
If you want to adjust the size to 200x200 DO NOT TOUCH THE Z-OFFSET
Enjoy
Project: TheJoker.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.3mm and the Actual Depth is 3.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Lavender Purple
At layer #20 (1.68mm) swap to BambuLab Green
At layer #30 (2.48mm) swap to Jade White for the rest.
Project: The-Joker150x150.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Lavender Purple
At layer #13 (1.12mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to Jade White for the rest.