Huawei Wireless Smartphone Charger Stand

Background

Unlike the iPhone's MagSafe charger, Huawei's wireless charger does not have magnetic suction capabilities. As a result, when charging the phone at night, it often happens that the phone is placed incorrectly on the charger, leading to it not charging properly. By morning, you find that the phone is completely discharged. To avoid this situation, I attempted to design a wireless charger stand that ensures the phone is always in the correct charging position.

Features

• Compatible with the Huawei CP61 wireless charger for embedding.
• Accommodates the Huawei Mate30 Pro with a case for charging.
• Supports both vertical and horizontal charging orientations for the phone.

If you wish to support other wireless chargers or larger phone sizes, please modify the model accordingly.

Special Notes

The printed model may slightly differ from the images I've provided, as I've made some adjustments and improvements to the design, specifically to the location of the back cable holder. If you have any other issues or suggestions, please leave a comment, and I'll make further improvements. I'm a beginner in 3D printing and modeling, and I hope to learn and progress together with everyone. Your feedback is welcome!

华为无线手机充电器的支架

制作背景

华为的无线充电器并不像iPhone的Magesafe充电器那样，具有磁吸功能，所以在晚上进行手机充电的时候，经常因为手机放在充电器上放歪了而导致并没有正确的充上电，第二天早上一看，彻底没电了。为了不想再体验这样的遭遇，我尝试设计了这样的一个无线充电器支架，手机放进去绝对是正确的充电位置。

特性

• 支持华为CP61型号的无线充电器的嵌入。
• 支持华为Mate30Pro手机带着手机壳放入进行充电。
• 支持手机的竖着放、横着放充电。

如要支持其它的无线充电器，以及更大的手机尺寸的话，请大家自行修改模型了。

特别说明

打印出来的模型可能与我的展示图片略微不同，这是因为后续稍微做了下调整和修改，对背部卡线的位置进行了改良。大家如果还有其它的问题和意见，欢迎留言，我会进行进一步改良。我是一个近期刚入手3D打印机的新手玩家，对建模也是初学，希望可以和大家多多交流一起学习进步。