三分钟教你如何制作自己的魔法阵无线充电面板

Three minutes to teach you how to make your own magic circle wireless charging pad

因为太多人的无线充电发射器并不一样，所以我上传了模型的STEP，请随意修改使用。

Because many people's wireless chargers are not the same, I have uploaded the model's STEP, please feel free to modify and use it.

注意 ！！！！！！我并没有使用bambu商店的无线充电器，只是不进行选择零件无法发布模型。

Attention!!!!!! I did not use the wireless charger from the Bambu store, but I cannot publish the model without selecting a part.

这是我无线充电面板的购买链接，https://mobile.yangkeduo.com/goods2.html?ps=lGM5lFs1RF

Here is the purchase link for my wireless charging panel，https://shoppyhub.mn/zh/product/626392353942

感谢互联网上所有的魔法阵图片和为我提供帮助的网友们。

Thanks to all the magic circle images on the internet and the netizens who helped me.

第一步：打开谷歌/百度/任意搜索引擎搜索你想要的魔法阵图片并下载。

Step 1: Open Google/Baidu/any search engine and search for the magic circle image you want, then download it.

第二步：点击网站左上方的MakerLab图标，进入工具选择页面。

Click on the MakerLab icon at the top left of the website to go to the tool selection page.

第三步：在新打开的页面，选择图像钥匙扣生成器，创建新项目。

Step three: On the new page that opens, select the image keychain generator and create a new project.

第四步：根据你的图片情况选择是否要扣除背景，如例图，我的这张图片是需要扣除背景的。

Step four: Based on your image situation, choose whether to remove the background or not. Like in the example picture, I need to remove the background in my image.

第五步：将图片颜色全部改为单色，或者你想要的多色，然后下载模型。

Step Five: Change the color of the image to monochrome or any multi-color you desire, then download the model.

第六步：将顶板模型拖入BambuStudio中。（因为市面上有太多无线充电发射器了，所以我上传了整个模型的stpe，请随意修改至合适的大小）

Step six: Drag the top plate model into BambuStudio.（Because there are too many wireless charging transmitters on the market, I uploaded the full model STPE, feel free to adjust it to the right size.）

第七步：将顶板模型改为你想要的颜色，右键模型，选择添加部件，然后选择刚才下载的模型。

Step seven: Change the color of the top model to whatever you like. Right-click on the model, select "Add Part," and then choose the model you just downloaded.

第八步：改变魔法阵模型的颜色和大小，然后将其移动到顶板图案正中间。

Step eight: Change the color and size of the magic circle model, then move it to the very center of the board pattern.

第九步：将魔法阵模型缩小至合适的大小（比如我的无线充电器顶板厚度为1mm，那么我的魔法阵模型厚度也修改为1mm）

Step nine: Resize the magic array model to the appropriate size (for example, if my wireless charger's top plate thickness is 1mm, then I also adjust the thickness of my magic array model to 1mm)

第十步：将魔法阵模型的高度正确修改，和你的模型厚度一样的话那么高也一样。

Step ten: Correctly adjust the height of the magic array model, so that it matches the thickness of your model.

第十一步：选择观赏面为底面，这样效果更好，如果流量校准正常，那么模型效果会很好。（感谢群里的朋友教我这个，我在部分细节无法上色处纠结了很久）

Step eleven: Choose the viewing surface as the base, it works better that way. If the flow calibration is normal, then the model will perform very well.（Thanks to my friends in the group, I've been struggling with some details I couldn't figure out for a long time）.

第十二步：一切都结束啦，请开始打印吧

Step twelve: All done, please start printing now.