“He who possesses all three Hallows will be the master of death”
Created this Hueforge out of an image i used to use as my wallpaper. Enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: Generic Black, Generic Grey, Generic White PLA+
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Grey
At layer #9 (0.8mm) swap to White for the rest.
Feel free to substitute grey for brown / dark green / dark blue for interesting results.
Folks that do not have an AMS should replace the color changes with pauses and manually swap filaments at the specified layers.
Please use the provided print profile, which has been carefully tuned to give a good balance between speed and quality.
Need a frame for this? Check out my Low Profile Frame for 20 x 20 Hueforge Prints!
A1 Mini Folks: You will be able to print this by resizing ONLY the X & Y axis sizes to fit your build plate (try 175 x 175). Leave Z axis untouched and the print should turn out fine.
Post your makes and have fun!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.