This is a Wall Mount For the Caliburn dart gun and other similar style dart rifles. there are a lot of dart rifle mounts out there, however most models grip the gun from underneath and wrap around the front in some type of way. I wanted something that utilized the magazine bore to simulate an actual mag, and give the gun a floating sensation without noticeable visibility of the actual mount.

the wall mount has a vertical height of 250mm to fit the bambu lab X1C print area. the only support needed should be underneath the flat potion that splits off from the mag, to the wall surface. and 2 support pieces under the simulated dart in the front and back. all other surfaces will print fine otherwise.

I have uploaded 2 different versions of the mount. there is a one piece print for those that want to print the artificial dart in a different color, or for those that just want a single color print. Also, I have a model that has the dart split off for those without dual color capabilities. the dart can be glued in place after printing both sections separately.

Note: i have not test printed the dart for fitment in the 2 piece mount. if you try it out and find the dart is too tight a fit, let me know and i will make the proper corrections.

enjoyy