Spidy Wall Lamp - 3 Version by Schneewittchen

Schneewittchen

Art>Signs & Logos

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

Version 1 : (Right) - 0.2mm layer, 2 walls, 15% infill

Designer

4.7 h

2 plates

5.0(4)

Version 2 : (Left) - 0.2mm layer, 2 walls, 15% infill

Designer

4.7 h

2 plates

Version 3 : (Both Side) - 0.2mm layer, 2 walls, 15% infill

Designer

6.1 h

3 plates

Open in Bambu Studio

Boost

Released

Description

Spiderman der an der Wand hängt, einfach zur Dekoration oder auch als LED nutzbar. Entweder für die LInke oder Rechte Seite nutzbar.

Version 1 : Für die Rechte Wandmontage

Version 2 : Für die Linke Wandmontage (hierbei handelt es sich um die selbe Druckdatei, die nur Vorbereitet gespiegelt auf dem Druckbett liegt, für Personen die nicht wissen wie es geht, deshalb muss hierfür kein Druckbild vorhadnen sein)

Version 3 : Spidy ist von beiden Seiten zu sehen

Spiderman hanging on the wall, simply for decoration or can also be used as an LED. Can be used for either the left or right side.

Version 1 : For right wall mounting
Version 2 : For left wall mounting (this is the same print file, only prepared mirrored on the print bed, for people who do not know how to do it, therefore no print image must be available)

Version 3 : Spidy can be seen from both sides

Comment & Rating (8)

@srh_taz

I love this design! Had to take it one step further - I mirrored the front panel and cut the back off the walls so Spidey is visible on both sides!

The designer has replied

@schneewittchen

That's exactly what I thought about doing as a model, but I left it because I thought it would look weird 😅 but then I will do it after all

@rk3832000

Boosted

Print Profile

Version 1 : (Right) - 0.2mm layer, 2 walls, 15% infill

einfach zu drucken sieht klasse aus an der Wand

The designer has replied

@schneewittchen

vielen dank :D

@user_4060166831

Print Profile

Version 1 : (Right) - 0.2mm layer, 2 walls, 15% infill

The designer has replied

@schneewittchen

danke 😊

@Gethgem

Boosted

Print Profile

Version 1 : (Right) - 0.2mm layer, 2 walls, 15% infill

@srh_taz

Print Profile

Version 1 : (Right) - 0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.