Parrot with color splashes - HueForge
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.9mm and the Actual Depth is 3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun ePLA-Lite Red Transmission Distance: 6
PLA+ Esun ePLA-Lite Yellow lite Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #18 (1.52mm) swap to Yellow lite
At layer #26 (2.16mm) swap to White for the rest.
Thanks!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.