A materialized Party Parrot emoji powered by motor.

I have no AMS so the model is for single filament print, the eyes and beak are printed separately. It's recommended to print the parrot's body in white filament and black in the rest. Gears and axes could be print separately to make it more precise, just add more plates as you wish.

Most of the parts are printed directly, you may not need any additional screws or nuts or something like this. On the other hand, to prevent the model from being too loose, the axes and gears are designed slightly overfitted, you may need to adjust them manually after printed, or apply some lubricant on the axes and the gears. To get the best performance, gears should be neither too loose nor stucked. Please carefully adjust them.

To complete the installation, one soldering iron and some solder wires are needed. If you don't or can't get the USBC connector used for this model, please feel free to modify the model to fit other power jacks just like 5.5mm DC jack.