Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA PolyLite Pink Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Pink
At layer #23 (1.92mm) swap to Jade White for the rest.

P.S. I didn't use pink color, so I swapped to Jade White at layer 16.

Hope you like!