Bambu Lab A1 Mini - AMS Lite tags - filament numbers - PTFE clips by GuyH77

GuyH77

3D Printer>3D Printer Accessories

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

4.0(8)

0.12mm layer, 2 walls, 15% infill

Designer

34 min

1 plate

0.12mm layer, 4 walls, 55% infill, scaled to 103%

31 min

1 plate

5.0(6)

Boost

Released

Description

Bambu Lab A1 Mini AMS Lite number tags

I've designed these tags to clip on to the 4mm OD tubes that feed in to the A1 Mini. A simple print to help you easily identify which filament corresponds to the ones in Bambu Studio.

The text is added in Bambu Studio so you can edit to change the text/number or font etc. I will add some for material type if useful?

Consider these a WIP. I'd appreciate feedback.

NOTE: I don't own an A1 Mini (Yet!). These were printed on my X1C.

Comment & Rating (17)

@bdwilson

Print Profile

0.12mm layer, 2 walls, 15% infill

beautiful print with my generic PLA profile! only issue is the clip on #2 keeps breaking when installing. I would advise sliding them on vs pushing them over, but even that didn't work for me. Going to try scaling up.

(Edited)

The designer has replied

@GuyH77

Thank for the feedback. do you think the clip is too tight then? there’s a small nib inside to grip the tube. I may make a version without that. welcome your thoughts. thanks

@Big.Daddy.

Print Profile

0.12mm layer, 4 walls, 55% infill, scaled to 103%

works great use them to identify the slots in the s4 thanks for sharing

@lion7718

Print Profile

0.12mm layer, 4 walls, 55% infill, scaled to 103%

@eric272

Print Profile

0.12mm layer, 2 walls, 15% infill

Easy to print and very quick. Great visual to mark the bowden tubes

@DomPerignon

Don't use the first profile: the black text is not flush with the flat part, so it's lifted up which causes print fails. Use the 103%, which has fixed this.