Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 205x205.41mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA smartfil pink Transmission Distance: 7.4
PLA smartfil azul Transmission Distance: 1.8
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Default White Transmission Distance: 5
PLA smartfil negro Transmission Distance: 0.4
This print uses 5 unique filaments

Swap Instructions:
Start with pink
At layer #12 (1.04mm) swap to azul
At layer #16 (1.36mm) swap to Savannah Yellow
At layer #21 (1.76mm) swap to White
At layer #25 (2.08mm) swap to negro for the rest.