This is a 6-blade adapter for Navimow i Series (e.g. i105e and i108e) I've found on another platform and decided to share with the Makerworld community. All credits go to the original author @Filamentor_13594.

Bill of Material

• 6x blades compatible with Navimow. I've used a kit bought on Amazon (ASIN B07R12FW5G - affiliated link https://amzn.to/4em68gi)

• 3 x M4 x 8mm screws (original ones can be re-used)
• 6x M4 x 6mm screws. I've used the ones included in the kit linked above
• 6 x M4 hot melt insert nuts

How to install it

1. Insert the M4 hot melt insert nuts into the holes of the ring.
2. Remove the 3 blades from your Navimow
3. Install the adapter ring to the Navimow by using the 3 x M4 screws (original scews can be re-used). Apply a thread-locking compound for additional safety.
4. Securely fasten 6 blades to the adapter ring using 6 x M4 screws
5. Ensure all components are properly secured before operating the lawnmower.

Disclaimer: Use of this adapter ring is at your own risk.