2nd Amendment (hueforge)

Flag, AR-15, and The 2nd. Amendment Shall not be infringed… A little patriotic Themed Hueforge print. :) Enjoy

this is a 4 color, but changes back a few times to get the effect that I wanted, pretty easy to do with and AMS. I would recommend using a darker blue, but I didn't have one available at the time of printing.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Sky Blue Transmission Distance: 8.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Sky Blue
At layer #5 (0.48mm) swap to Red
At layer #8 (0.72mm) swap to Black
At layer #14 (1.2mm) swap to White
At layer #19 (1.6mm) swap to Black
At layer #21 (1.76mm) swap to White for the rest.