Calvin & Hobbes - Two Strong
4 Color Filament Painting
AMS-ready
If you like you can also print with white pla only and then be creative with your acrylics or water colors, the contours are already there.
Easy without AMS:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177.97x171.88mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Orange
At layer #19 (1.6mm) swap to Cream White
At layer #31 (2.56mm) swap to Ivory White for the rest.
Bill Watterson, Creator of Calvin & Hobbes, Thank You! This is Fan Art.