A practical dispenser for storing nasal rinsing salt packs in the bathroom cabinet. At the front there is a small compartment for removing the nasal rinsing salts. The box can be refilled from the top.

Optionally, a lid can also be printed, which makes it easier to stow away in the cupboard, for example, if something else is to be placed on it.

A connector can optionally be printed to connect multiple boxes together.

As an alternative to nasal irrigation salts, small portion packs of sugar, salt, ketchup or mustard should certainly fit.

Dimensions:

1. Dispenser box: 165 mm x 92 mm x 120 mm
2. Nasal rinsing salt packs: 75 mm x 25 mm x 3 mm

Note:

The print of the box has a small overhang where the upper part of the box rests. However, this could be printed with the Bambu PETG/PLA Basic filament without any problems. No rework was necessary. The print settings are set accordingly to Bambu filament, so for other filaments it is important to use the correct settings (speed / temperature / flow) so that the print does not fail due to the overhang.