AAA battery holder in an AR-15 magazine design, not your typical battery holder!! It will hold approximately 22-24 batteries.
The internal slide is supported by a printed spring. The spring works best printed in PETG or ABS which is more flexible and will retain it's shape better and for a longer period of time. The bottom cap is removable and is held in place with a locking tab that works the same way an actual AR-15 magazine locks in place.
The slots in the back show how many batteries are in the magazine.
The magazine is very easy to assemble. The spring will friction fit into the bottom of the slide. Insert the slide into the bottom of the shell and let it slide up to the top. The locking clip goes in next and you'll have to hold the clip and spring down to slide the bottom cap on. The bottom cap slide from the front of the magazine to the rear (the open slots) and will click in place when the tab on the clip pops into the slot in the cap. The next step is to load the batteries!!!
I have printed all the components using PLA and it works great. I suggest printing the spring in PETG since it is a more flexible material. The color of the spring really doesn't matter since you will not see it unless you open up the magazine. I would print a couple springs right away to have a spare. I don't have much information on how long the plastic spring will keep it's tension.
All the components fit on one sheet on my P1S. I have printed the slide and bottom clip in a different color to accent them.
This model works but is always being tweaked and improved. Please let me know of any issues and/or any items needing improvement!!
I am working on a AA option for this design and will post it when done.