Project: 150.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Red Transmission Distance: 4
PLA White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to White for the rest.