Ever wish your Pi4 looked like a tiny Gamecube? Well now it can with this handy enclosure! Prepare yourself to Pi in style!!
The enclosure is printed in 3 parts. It slides together and stays shut using MAGNETS. Looks great sitting on your desk!
Material
- A Raspberry Pi 4* (obvs)
- The printed parts. The materials I used are as follows:
- 4x M2 heat staking inserts*
- 4x M2 x 6mm screws
- I used the ones from this kit* with the included washers
- 6x 3mm x 6mm magnets*
Assembly
- Print the parts
- Heat stake the M2 heat staking inserts* into the 4 posts on the bottom part of the enclosure
- Press 3x 3mm x 6mm magnets* into the bosses in one side of the enclosure
- Press 3x 3mm x 6mm magnets* (making sure the polarity is correct) into the other side of the enclosure
- Install the Raspberry Pi 4* into the bottom of the case with the M2 screws (washers optional)
- Snap the “front” printed part into the “top” part
- Slide the "top+front" onto the “bottom+Pi” assembly
Like this model?
* = Affiliate Link. I use and recommend any product linked here unless otherwise noted.
Happy Tinkering!