My 3D Printed enclosure for a cyberdeck.
I Printed with 10% infill, Adaptive Cubic, 3 walls on the Generic Silk PLA Profile
Needed Parts:
Raspberry PI Model B (Used model was a RPI 5)
Waveshare 9.3" Touch Display (https://www.waveshare.com/9.3inch-1600x600-lcd.htm)
INIU Power Bank (https://www.amazon.com/gp/product/B08VDJP7WN)
GK61 Keyboard PCB
GK61 Aluminum Plate
Your Choice of Switches / Keycaps
2 x M2.5 x 25mm Screws
1 x M2.5 x 20mm Screw (I found a smaller screw on the top left screen standoff helped alignment)
3 x M3 12mm Self tapping Screws (For mounting Keyboard PCB to print. There are no holes, they need to be self tapped)
1 x Type C to Type C for RPI Power
2 x Type C to Type A for keyboard connection and Screen Power
Optional:
Pimoroni NVMe Base Duo (Mounted with a single screw on the 4th monitor standoff)
Used Parts in Photo:
Elegoo Silk PLA Coral Pink (https://www.amazon.com/gp/product/B0CHS6MJ2S)
DROP + MITO SA Laser Keycap Set in Cyberdeck 2 (https://drop.com/buy/drop-mito-sa-laser-custom-keycap-set?defaultSelectionIds=974120)