11 inch light (without the lightbulb)
15 inch with the lightbulb x 6 ¾ inch x 6 inch
You will need to buy:
- 3 ½ inch lightbulb to have the same effect as the photo.
- Light cord kit ( the socket must have a maximum outer diameter of 38 mm) you can sand it down if it's too big.
- Epoxy or any other glue.
instructions:
- Using epoxy (or any type of glue) glue the top part to the legs of the light (hole for the light cord in the back).
- You need to pass the ligh cord (plug first) frome the head to the back of the light.
- Screw the lightbulb to the socket of the light cord.
- Pull down on the light cord until the bulb reach the top of the neck of the light.