SUPPORT ME ON CULTS 3D! Download the models HERE
Filament (1.75):
for neck: 10-12mm
for console: 15-22mm
Wire:
min 120-130mm long, max 1.5mm diamater
(use a bigger paper clip ;) )
The assembly is very simple.
You push the filaments through the holes.
The wire should be no thicker than d=1.5mm. Once you have everything printed first push the wire through the body. Bend it slowly and patiently while pushing it through.
Once you have the body assembled put it all into the console.
Filament hole diameter: 1.9mm
Wire hole idamater: 1.75mm
Use this positions to printing:
HEAD AND BODY:
Nozzle: 0.4mm
Layer high: 0.2mm
Perimeters: min 4 walls, only one in bot and top
Bottom and Top layers: 1-1
Gap fill: optional, but recommended
Support: no
CONSOLE
Nozzle: 0.4mm
Layer high: 0.2mm
Perimeters: min 4 walls
Bottom and Top layers: min 3-4
Infill: 20-30%
Gap fill: optional
Support: no
Filaments: PLA
Thank you very much for downloading and liking. Please follow me so you don't miss out on the next toy/gadget/tool I'm planning to create!