Monochrome Challenger (HueForge)
Monochrome Challenger (HueForge)
Print Profile(1)
Description
AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
This picture was hand drawn digitally and printed using HueForge.
Stl and 3mf file included
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Sunlu Meta Gray Transmission Distance: 2
PLA PolyLite Grey Transmission Distance: 1.1
PLA BambuLab Basic Jade White Transmission Distance: 5.7
Swap Instructions:
Start with Charcoal Black
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to Grey
At layer #21 (1.76mm) swap to Jade White for the rest.
Comment & Rating (5)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
