对原作者的增高架进行了额外的开孔，以配合新的风道。可以拥有额外的散热，十分有效。

请务必打印修改后的增高架，替换原始增高架的未开孔靠后部分。

如需自行设置打印，建议对模型进行分割再打印。一体成型可能会导致失败。

非打印材料：

12*12cm风扇
扎带或螺丝，以用于固定风扇
502或其他粘合剂，用于粘合风道的上下部分以及风道与增高架的链接。

Additional cut-outs were made to the original author's elevated frame to accommodate the new air ducts. It can have extra heat dissipation, which is very effective.

Be sure to print the modified booster to replace the unperforated rear portion of the original booster.

If you want to set up your own printing, it is recommended to split the model before printing. One-piece molding can lead to failure.

Non-Printing Materials:

12*12cm fan
Cable ties or screws to secure the fan
502 or other adhesives used to bond the upper and lower parts of the duct and the link between the duct and the elevated frame.