Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Sunny Orange Transmission Distance: 8
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Sunny Orange
At layer #19 (1.6mm) swap to Yellow
At layer #27 (2.24mm) swap to White for the rest.