Hueforge of the girl in the well

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.26mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA Bambulab Basic Black Transmission Distance: 0.3
PLA Bambulab Basic White Transmission Distance: 6
PLA Bambulab Matte Gray Transmission Distance: 2.5
PLA Generic HS Gray Transmission Distance: 3

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.