Album cover for Muse's album Origin of Symmetry.

Measures 120mm x 120mm (approx. 4.75" x 4.75") - just like a CD booklet insert!

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

Note this model uses two different white filaments - both a low and high TD white are required!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 120x120mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.7
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA+ eSun Cold White Transmission Distance: 1.7
PLA BambuLab Basic Bronze Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 5.6
PLA BambuLab Basic Yellow Transmission Distance: 5.2
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.44mm) swap to Blue Gray
At layer #12 (0.6mm) swap to Jade White
At layer #20 (0.92mm) swap to Cold White
At layer #23 (1.04mm) swap to Bronze
At layer #24 (1.08mm) swap to Orange
At layer #28 (1.24mm) swap to Yellow for the rest.