⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Funnel for AMS Silica Backpack

After the release of this unique AMS Silica Backpack, some users asked me about the funnel for this. I found this is quite a good idea!

Here is it - just slide out the lid from the AMS Silica Backpack and slide this funnel instead - it fits perfectly to the AMS Silica Backpack and helps to fill this AMS Backpack with silica comfortably! 👌😉

A beautiful bamboo logo fits perfectly on the handle and there is a small grip-bar at the bottom, which is very comfortable to hold!😍

Of course, you can also easily hang the funnel on a handle ring! 🦾😉

⚠️I recommend to use my print profiles - there are all these settings well done and tuned!

Print / Install Instructions (or just use one of my print-profiles!)

• place them with the logo on the build plate
• first layer speed: 20ms per second (for perfect look of the bambu-logo)
• 2 perimeter, 5 top, 3 bottom layer, 20% infill
• top surface pattern: Concentric
• bottom surface pattern: Concentric
• print layer height: 0.2mm
• WALL generator: Arachne

👌Just take a look at this video, here you can see how you can easily use this funnel with your AMS Silica Backpack! 😍👍

Cool other Designs for AMS silica/dry pods:

— ! —

Thanks for downloading, rating in advance and please don't forget to like👍and to BOOST 🚀 this model! ;-)

Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:

If you like my work and want to support me - please follow me here and on Instagram. If you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)