Funnel for AMS silica gel beads dry pod box

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

‼️If you are also interested in AMS 2 pro silica front boxes - feel free to take a look at these, with easy to print “weaving” design:

Funnel for AMS silica/dry pods

Perfect funnels for big (three in the middle) and small (two slimone on the corner) silica dry pods for Bambu Lab AMS or AMS Silica Dry Box for Aqara Humidity Sensor 👌😍

Most funnels for the popular pods are inserted, have to be held by hand and do not allow the pods to be filled to the brim…😒

These funnels are very easily put on instead of the lid (but specifically not as tight as the lid!) and stay on the pods by themselves and can be comfortably held together with the pod on the funnel handle! In addition, the pods can be easily filled to the brim because they are clipped on from the outside.👌

A beautiful bamboo logo fits perfectly on the handle and there is a small grip-bar at the bottom, which is very comfortable to hold!
 

Print / Install Instructions (or just use one of my print-profiles!)

• place them with the logo on the build plate
• first layer line width: 0,38 (0.4 mm Nozzle) (for perfect look of the bambu-logo)
• first layer speed: 20ms per second (for perfect look of the bambu-logo)
• 2 perimeter, 5 top, 3 bottom layer, 20% infill
• top surface pattern: Concentric
• bottom surface pattern: Concentric
• print layer height: 0.2mm
• WALL generator: Arachne

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)