..first thks to ToddsWorld for the great design...
I was using his design for all my stock CR-10s Pro, but when I started to add z-syn or even frame bracing, I needed to alter the design and finally decided to do a complete makeover.
Whats new:
You will get two clips:

• Clip.stl is for regular setup, which means the z-syn pulley is installed below the top lead screw anti wobble bracket.
• Clip_flipped_Bracket.stl is for a twisted bracket where you can mount the pulley on top not to loose any z height (check out details here https://www.printables.com/model/229079-cr-10s-pro-v1-cr-10s-pro-v2-and-cr-10-max-maintena)
  a screw on mount if you are using frame bracing:
• Screwon_Mount.stl
  A completely new loopeye which can also be done in a 2 pcs. print for better strength of the arm:
• Loopeye_V3.stl
• Loopeye_only.stl 2 pcs. print
• Loopeye_Arm_only.stl 2 pcs. print, print with support in the model orientation in order for the layer lines to be oriented where the bending force will be applied

If you have any comments, just let me know