Simple customisable organizer with lid to suit your needs.

Adjustable values:

SegmentX

This value determines the width of one portion from the box in mm. Minimum value is 10.

SegmentY

This value determines the depth of one portion from the box in mm. Minimum value is 10.

SegmentsInX

This value determines the amount of portions in X-axis. Minimum value is 2

SegmentsInY

This value determines the amount of portions in Y-axis. Minimum value is 2

Height

This determines the height from the bottom to the top part of the box in mm (not including the lid). Minimum value is 8

WallThickness

This value detrmines the thickness of the inner walls. Outer walls are two times thicker than the inner walls in mm. Recommended value is 0.4 - 2.

Note.

You might need to separate the lid and the box itself to separate models if they both don't fit into your printers build area together. You can do this with your slicers cut tool.