Print Profile(2)
Description
Owl - HueForge
https://makerworld.com/en/models/478163#profileId-389273
Shima enaga - Japan - HueForge
https://makerworld.com/en/models/475975#profileId-386839
Swan in night lake - HueForge
https://makerworld.com/en/models/457027#profileId-364972
Parrot - HueForge
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #17 (1.44mm) swap to Silver
At layer #22 (1.84mm) swap to White for the rest.
Thank you!
Comment & Rating (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
