P&O Cruise Ship Arcadia Model.

This is P&O Cruises 2nd smallest cruise ship.

It was originally built as Cunard Queen Victoria, but quite late in the build process it was decided to move the ship to the P&O brand.

Build instructions - print all plates - ideally multi colour.

The main body of the ship requires 8 colours - there 2xAMS.

The sports court requires 3 colours - with includes the 9th colour - green.

Remove the supports under the bridge overhangs and around the top of the lift shafts - as indicated below.

Insert lifts from the bottom, funnel, and sports courts.

It may be necessary to use a hex key to help insert the lifts and sports courts.

The front mast is a little tricky to insert and quite fragile - so 2 copies are included on the plate.

It may be necessary to drill the hole out to 2mm, and trim to inserted lug part slightly.

---

Background video showing the difference between this ship and Queen Victoria.

https://youtu.be/LVF4GZeGDQ4?si=EmF737iSfJCJCIvH

For background info about the development of these models see this forum thread.

https://forum.bambulab.com/t/cruise-ship-print/5122/104?u=ukdavewood

Modelled from photos and videos using Fusion 360.

Models of other P&O ships at various sizes are also available on MakerWorld.

This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.

This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.

Recommended filaments to use for this print arer:

Bambu Lab PLA Matte Marine Blue

Bambu Lab PLA Basic Black

Bambu Lab PLA Basic Orange

Bambu Lab Matte Grass Green (HEX Code #61C680)

Bambu Lab Iridium Gold Metallic (HEX Code #B39B84)

Sun Cold White PLA+   or one of the Bambu Whites - although they are a slightly off white

Bambu LAB PLA Silver (HEX Code #A6A9AA)

Bambu Lab PLA Basic Blue (HEX Code #00358E)

Bambu Lab PLA Basic Yellow

Bambu Lab PLA Basic Red (COOD1E)