Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D British Racing Green Transmission Distance: 3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Overture Matte White Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to British Racing Green
At layer #9 (0.8mm) swap to Earth Brown
At layer #12 (1.04mm) swap to Blue Gray
At layer #16 (1.36mm) swap to White for the rest.

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation, or join my patreon for commercial rights and priority prints https://www.patreon.com/sblayeredcreations