PLA Glue Gun Sticks

Copyright Claim

PLA Glue Gun Sticks

Boost
374
443
21

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.28mm layer, 2 walls, 100% infill
0.28mm layer, 2 walls, 100% infill
Designer
1 h
1 plate
4.7(9)

[With Brim] 0.28mm layer, 2 walls, 100% infill
[With Brim] 0.28mm layer, 2 walls, 100% infill
34 min
1 plate
4.5(4)

Boost
374
443
21
8
250
86
Released

Description

Reupload of existing design from FormFutura on Printables (https://www.printables.com/model/855880-ribbed-glue-gun-sticks)

 

Description:

You have a little bit of filament left so these Ribbed Sticks can be used for fixing and glueing your other projects. To prevent wasting all the small bits and pieces. The ridges make sure your glue gun can grip the stick.

 

Blog About this design:

https://formfutura.com/blog/pla-glue-sticks/

 

Instructions:

You can use the Ribbed Sticks in your average hot glue gun with a diameter of 10mm

To use the Ribbed Sticks in a smaller glue gun you can also scale it down.

Print the Ribbed Sticks with 100% infill to make sure you make efficient use of space.

Comment & Rating (21)

Please fill in your opinion
(0/5000)

yes it does and it’s actually useful to fix broken prints 👍 but unfortunately not for glueing pieces together as well 👌
6
Reply
Has anyone tried printing a hollow version of this and filled it with "poop" bits/shredded supports?
8
Reply
Print Profile
[With Brim] 0.28mm layer, 2 walls, 100% infill
Great!!
0
Reply
Print Profile
0.28mm layer, 2 walls, 100% infill
Perfect!!
0
Reply
Getting lots of stringing while using this in the hot glue gun, how can I adjust the hot glue gun retraction settings, or temp?
The designer has replied
4
Reply
What kind of Glue gun do you use?
0
Reply
does that really work?
2
Reply
Not sure how well the PLA will bind pieces together, but you can probably use it as "caulk" between joint pieces to reduce the visibility of seems
2
Reply
Print Profile
0.28mm layer, 2 walls, 100% infill
cool idea
1
Reply
Print Profile
0.28mm layer, 2 walls, 100% infill
Very good print
0
Reply
Print Profile
[With Brim] 0.28mm layer, 2 walls, 100% infill
Does not fit any of our standard US glue guns. It is too thick
0
Reply
kind of like a big bore DIY 3D pen?
0
Reply