Electric Water Gun Toy - UZI(3.7v)

Electric Water Gun Toy - UZI(3.7v)

Boost
366
585
82
GIF

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
11.6 h
3 plates

Open in Bambu Studio
Boost
366
585
82
2
612
12
Released

Description

Electric Water Gun Toy - UZI:

1.材料:pla,petg,abs均可/Materials: pla, petg, abs all available;

2.打印机尺寸:220mmx220mm以上的平台/Printer size: Platform size 220mmx220mm or above;

3.颜色:效果图及实物图采用黑色与卡其色/Color: Black and khaki colors are used in the renderings and actual images;

4.射程:7-8m;/Range: 7-8m;

5.电控清单:波箱采用恒力冠玩具配件厂的SQ-03,击发开关采用同一家的防水开关,电池为3.7v14500电池一节,电池盒为14500或者5号电池盒即可,连接线若干。后续拓竹官方上线配件,将第一时间添加相关配件。/Electrical control list: The wave box adopts SQ-03 from Hengli Crown Toy Accessories Factory, and the ignition switch adopts the same waterproof switch. The battery is a 3.7v14500 battery, and the battery box can be a 14500 or No. 5 battery box, with several connecting wires. Subsequently, Tuozhu will officially launch accessories and add relevant accessories as soon as possible.

 


Documentation (1)

Assembly Guide (1)
UZI-Water pistol_c6f850b1-44e6-4d00-9544-d7eaf85a2ab2.pdf

Bill of Materials

List other parts
1.波箱采用恒力冠玩具配件厂的SQ-003;/The wave box adopts SQ-003 from Hengli Guan Toy Accessories Factory; 2.击发开关采用同一家的防水开关;/The firing switch adopts the same waterproof switch from the same company; 3.电池为3.7v14500电池一节;/The battery is one 3.7v14500 battery; 4.电池盒为14500或者5号电池盒即可;/A battery box of 14500 or size 5 is sufficient; 5.连接线若干;/Several connecting lines; 6.胶水。/glue。

Purchase from Bambu Store

Comment & Rating (82)

Please fill in your opinion
(0/5000)

我搜了下配件,你是不是把SQ-03写成了SQ-003了
The designer has replied
0
Reply
对的,抱歉哈,已修改
0
Reply
Replying to @Pathfinder.Ant :
没看到充电接口,这是怎么打算处理电源问题
0
Reply
Replying to @user_683757713 :
电源用的可拆卸14500电池,配合单节的电池盒子,我的组装里面有张实图你看下
0
Reply
感谢,根据自己情况,改进了电池,安装了一节18650电池,供楼主参考, 另外想请教一下,ppt中水管部分,因为波箱的进水是朝后进的,所以造成水管是有弯折,ppt里我看你做了一个90度的弯折(蓝色的) ,请问这个文件有吗。非常感谢。
The designer has replied
0
Reply
国内站有人专门做了这个,你可以去搜一下哦
0
Reply
Replying to @Pathfinder.Ant :
怎么搜索不到?
0
Reply
Replying to @user_4270214572 :
国内站,不是国际站
0
Reply
极限摆盘,一盘搞定
The designer has replied
1
Reply
你这太狠了,一个色太单调了,两盘两个色多好
1
Reply
Replying to @Pathfinder.Ant :
会不会是和老婆一人一把,打两盘,两个颜色拼
0
Reply
Replying to @user_3057214372 :
哈哈
0
Reply
接线方式能再清楚一点吗
The designer has replied
0
Reply
电池正极接波箱的红线,负极接黑线,然后开关做的事情就是将连接的负极或者正极断开或者连接上,所以,记住 断开正极或者负极,然后把开关连接到断开的两跟线头上就可以了
0
Reply
Replying to @Pathfinder.Ant :
不好意思,小白,不是很明确,波箱的正负极连接到电池,开关链接在他们的中间吗
0
Reply
Replying to @Polyilother :
你看下这个图
0
Reply
请问水管是多粗的
The designer has replied
0
Reply
内径4毫米
0
Reply
Replying to @Pathfinder.Ant :
外径多少合适
0
Reply
Replying to @Arthur.1 :
5-6都可以
0
Reply
完美适配小罐冰红茶
The designer has replied
0
Reply
这个金色挺好看,丝绸金吗
0
Reply
极限摆盘
0
Reply
Where can i get the parts for germany?
The designer has replied
1
Reply
bambu lab后续会开发出来
0
Reply
Replying to @Pathfinder.Ant :
No, the electric parts.
0
Reply
Replying to @maikowulf :
是的,电气部分bambu lab正在接触供应商
0
Reply
弄完了,弹药箱比较难适配,但总归是能用上了,遇到了一些问题,不知道是不是装配或者打印精度的问题,一个是波箱装进去有点歪,感觉会发射到消音器上,严重影响射程,还有一个是开关刚好卡了一点点,会卡不上,还有m3x20那颗螺钉超级难拧,最后还有一点拧不上,然后是这个波箱感觉威力有点小。之前是打的petg,打算再用pla重新打一个试试
The designer has replied
0
Reply
你试试冰红茶或者芬达,我一直用这两个
0
Reply
Replying to @Pathfinder.Ant :
用上了200多ml的小可乐
0
Reply
Replying to @jizeguo :
小瓶子拿着还轻松
0
Reply
水瓶多大的
The designer has replied
0
Reply
建议用500ml及以下的,太大拿着太重了
0
Reply
Replying to @Pathfinder.Ant :
瓶口大小呢
0
Reply
Replying to @user_2510196576 :
普通矿泉水瓶就可以,这玩意大多数都是一样的
0
Reply