Baphomet Hueforge
Baphomet Hueforge
Print Profile(1)
Description
An image of Baphomet sitting cross legged on the floor, ominously contemplating with wings spread.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA Kexcelled Gray Blue Transmission Distance: 2.6
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments but you may substitue to your own tastes.
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray Blue
At layer #8 (0.72mm) swap to Steel Grey
At layer #12 (1.04mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
